Advertisement
Quick Links
Advertisement
Related Manuals for Scott PATRON MY22
Summary of Contents for Scott PATRON MY22
- Page 1 PATRON MY22 MANUAL...
-
Page 2: Technical Data
& swingarm tyre clearance is adequate when replacing the rear tyre. For the full installation of the motor, wiring, and frame parts please only take your bike to an Authorised Scott Dealer for assistance. ENGLISH / PATRON TECH MANUAL... - Page 3 Geometry: MY22 Patron eRIDE Small Medium Large X/Large HEAD TUBE ANGLE 64.5° 65° 65° 65° HEAD TUBE LENGTH 120 mm 125 mm 135 mm 145 mm TOP TUBE HORIZONTAL 579.4 mm 595 mm 625.6 mm 656.4 mm STANDOVER HEIGHT 766 mm 766 mm 766 mm 766 mm...
- Page 4 PLEASE TAKE NOTE OF THE BELOW ICONS THROUGHOUT THIS MANUAL FOR SAFE PRACTISE EASY TECHNICAL STEP IMPORTANT TECHNICAL STEP (Take your time, get it right) NO GREASE WITH GREASE THREADLOC BEARING FIT WARNING/CAUTION TORQUE CHECK ENGLISH / PATRON TECH MANUAL...
- Page 5 Hangers & Axles: The Patron has only one rear hanger, this is the SRAM UDH. This is available from your SRAM supplier, it is only available via Scott if you do not have a supplier in your region. 286000 - SCO Dropout Sram UDH 21...
- Page 6 The rear axle contains a “plug in“ tool T30/T25 and M6 Hex key: 290016 - SCO Axle RWS Rear 148x12 Spark Plug 22 The Axle must be assembled with grease, and torqued to 10Nm. ENGLISH / PATRON TECH MANUAL...
- Page 7 Maximum Seatpost Insertion: The same for both carbon and alloy front triangles. S= 245mm M=265mm L=300mm XL=315mm ENGLISH / PATRON TECH MANUAL...
- Page 8 Cockpit: The Patron has the new E-bike specific Hixon Handlebar with integrated cable routing: 292623 SCO eRIDE Bar SY Hixon IC Patron Wty 22 The Patron Headset will be: 288252 SYN Headset ZS66/28.6 – ZS66/46 There is a new spacer kit for the Patron Stem and handlebar: Spacer kit will include Stem and Top cover, headtube cover and 2pcs of 5mm and 3pcs of 10mm spacers.
- Page 9 Cable Guides & Covers: The Patron cable routing is internal, the following guides and covers are available: Chainstay Protector: 292692 SCO eRIDE CST protector Patron 22 Main Pivot cover: 292633 SCO eRIDE M/P cover Patron 22 Cable Guide Kit & Chain Guide. 294279 SCO eRIDE cableguide set 294278 SCO eRIDE Chainguide Patron 22...
- Page 10 The Patron Features the new thinner cable housings from Jagwire. 294433 SCO Cable kit Spark 22 seatpost / shock / fork, 3mm / outer x3 1.8m / 1mm inner x4 1.5m plus end caps The shock covers will be different for alloy and carbon front triangles. The shock cover kit will include all the fixings and brackets.
- Page 11 There is a new twinloc system in MY22, with 4 different options in one kit. 290009 - SCO Twinloc downclamp 22 SPARK RC 900 Description Part Number Cam Colour SCO Bike Patron eRIDE 900 Twinloc Int. 290009 Blue cam Ultimate Bottom SCO Bike Patron eRIDE 900 Twinloc Int.
- Page 12 Linkage Overview: The Patron has a simple bearing system that can be easily maintained. There is a new Swingarm repair kit for the Patron: 291731 SCO eRIDE Swingarm Rep kit Patron 22 Main Pivot/Chainstay Overview ENGLISH / PATRON TECH MANUAL...
- Page 13 Linkage/Seatstay Overview Main Linkage Overview ENGLISH / PATRON TECH MANUAL...
- Page 14 Chainstay/Seatstay Overview Shock Installation Overview 294281 SCO eRIDE Shock mount bolt kit Patron 22 ENGLISH / PATRON TECH MANUAL...
- Page 15 Carbon Front triangles. 291730 SCO eRIDE Motor Cover Patron 22 Speed sensor including cable is provided by Bosch. The speed sensor holder is available from SCOTT. 292632 SCO eRIDE S-sensor clip Patron 22 ENGLISH / PATRON TECH MANUAL...
- Page 16 Two different battery covers, one kit for alloy, and one for carbon front triangles. The kit contains fixations and screws. 291729 SCO eRIDE Bat Cover Patron CB 22 291728 SCO eRIDE Bat Cover Patron AL 22 Charging Port Assembly: 292625 SCO eRIDE Charging door Patron 22 ENGLISH / PATRON TECH MANUAL...
-
Page 17: Battery Installation And Removal
Battery Installation & Removal: Open the battery cover. Slide the battery into the battery tube. Make sure the battery is the correct way around! ENGLISH / PATRON TECH MANUAL... - Page 18 Close the battery door and make sure Re-install the battery cover and the catch is engaged correctly. tighten. ENGLISH / PATRON TECH MANUAL...
- Page 19 To remove the battery, unlock Slide the battery out of the battery the cover by pulling on the tab. tube. Making sure the catch has disengaged. ENGLISH / PATRON TECH MANUAL...
-
Page 20: Rear Light
Rear Light: The Patron will have a rear light mounted on the seatstays. The aftermarket light from Syncros will not include the connection cable. This must be purchased from Bosch seperately. (Light Cable for Rear Light 1400mm BCH3330_1400) 288342 SCO eRIDE Rear light/fender Patron 22 Rear and Front lights cables will be pre- installed on all complete bikes (with and without rear light) from the factory. - Page 21 What will SCOTT do in the event of a guarantee case? SCOTT will replace the defective product with a product of a quality or nature and similar level, will repair or refund the purchase price (after presentation of the proof of purchase of the product), in its sole discretion.
- Page 22 SCOTT Sports SA reserves the right to change the content of this techbook, particularly colors, materials and specifications, at any time without prior notice. Any liability shall be exempted. Products shown may not be available in all regions, please check with your local SCOTT retailer for availability. EDITOR...