Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Scott Voltage FR 700
Summary of Contents for Scott Voltage FR 700
- Page 1 BIKE OWNER’S MANUAL 2015 All rights reserved © 2014 SCOTT Sports SA SCOTT Sports SA | 17 Route du Crochet | 1762 Givisiez | Switzerland Distribution: SSG (Europe) Distribution Center SA P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium...
-
Page 2: Table Of Contents
The Voltage FR 700 should be adjusted exactly to the current Rear Suspension Set-Up Voltage FR 700......07 rider to maximize safety, comfort and fun while riding. -
Page 3: Voltage Fr Concept
VOLTAGE FR CONCEPT GEOMETRY/TECHNICAL DATA VOLTAGE FR 700 Voltage FR 700 is the result of years of research and development searching for one Sizes S, M and L of the most versatile, durable and affordable gravity bikes available on the market,... -
Page 4: Adjustable Rear Travel
ADJUSTABLE REAR TRAVEL REAR SUSPENSION SET-UP VOLTAGE FR 700 Depending on the different models of Voltage FR you’ll find the shock mounted at The Set-Up of the rear shock can be easily done within a few minutes. 2 different positions that will provide 2 different suspension travels to the frames Please take this time to avoid dangerous riding performance and to get the best without changing seat/headtube-angles or riding position on the bike. -
Page 5: Recommended Tools For Set-Up
To check this, release the air/remove the coil, install the shock and compress the Please make sure to mount the rear shock of your SCOTT Voltage FR 700 always as shock completely. shown in the picture below (piggy back in the “Top/Bottom” position). -
Page 6: Adjustable Headset
IDS DROP OUT SYSTEM Voltage FR 700 is compatible with 31.6mm diameter seat post and 34.9mm The Voltage FR 700 offers the possibility not only to change drop out hanger in Seatclamp diameter. case of damage, you also can choose between different drop outs of the SCOTT IDS (Interchangeable Drop-Out System): Please note that maximum insertion is 120mm Maximum. -
Page 7: Rear Brake Mount Standard
For thru axle hubs – 12mm axle. Use only SCOTT provided axle. 4 x 6902 2RS For nutted hubs – 12mm nutted axle. Please contact your local SCOTT dealer for supply of those parts in case you want to re-fit your bike with one of those versions. REAR BRAKE MOUNT STANDARD IS rear brake mount. -
Page 8: Pivot Maintenance
203mm/180mm PIVOT MAINTENANCE The pivots and bearings on SCOTT Voltage FR 700 are extremely easy to maintain. An external treatment with a grease spray after every bike wash is all that is needed. We do not recommend heavy grease sprays as these leave a film on the parts which is difficult to remove. -
Page 9: Cable Routing
CABLE ROUTING Rear Triangle Routing: Internal gear routing through right seat stay via entry just after link and exit just before drop out. Mainframe Routing: External for both gear and brake via 3 cable guides. Cables exit mainframe under link. Brake external along seat stay via 3 cable guides VOLTAGE FR | BIKE OWNER’S MANUAL 2015 BIKE OWNER’S MANUAL 2015 |... -
Page 10: Warranty
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely Year .
Need help?
Do you have a question about the Voltage FR 700 and is the answer not in the manual?
Questions and answers