Table of Contents
Advertisement
REPLACEABLE DROPOUT
On Genius bikes of model year 2013 you can replace the rear derailleur hanger.
Depending on the different models you'll find following options:
1. 142mm axle with RWS 142/12
This is available via the SCOTT distribution:
219574
complete set of RWS 142/12
219577
right side replaceable RD hanger
2. 135mm axle with RWS 135/5
This is available via the SCOTT distribution:
219572
complete set of RWS 135/5
219575
right side replaceable RD hanger
3. Regular 135mm rear axle with QR
This is available via the SCOTT distribution:
206473
replaceable hanger
If you want to use another RWS standard SCOTT also offers after-market parts for
specific wheelsets for the following parts via the SCOTT distribution:
219574
RWS 135/12 parts set
219576
right side replaceable RD hanger
REAR DISC BRAKE MOUNT
Genius can be used with 3 different disc rotor sizes on the rear brake.
The rear disc brake on Genius is Postmount
(PM) Standard on the left seatstay and it is
possible to use disc rotors with 180, 185 and
200mm diameter.
Please note that for the assembly of 185 and
200mm rotors you might need adapters/
washers between the PM port on the frame
and the brake calliper.
28
GENIUS | BIKE OWNER'S MANUAL 2015
For 185mm rotor diameter you will need 2 red anodized spacers that can be ordered
via the SCOTT distribution with:
219568
Brake Mount Adapt.Spacers 4mm f/185mm
For the 200mm rotors please use for:
SRAM/Avid: "+20mm" adapter
Shimano: F180PP2
FRONT FORK SET-UP/CHANGE OF FRONT FORK
For the set up of the front fork please use the fork specific manual attached to
the bike.
We recommend using front forks with a travel of 150mm (27.5") and 130mm (29"), as
this will not influence the geometry and alter handling of the bike.
For details on the technical length of the recommended forks please refer to the
Tech Info Chart before mentioned.
PIVOT MAINTENANCE
The pivot and bearings on SCOTT Genius are extremely easy to maintain.
An external treatment with a grease spray after every bike wash is all you have to do.
We do not recommend heavy grease sprays since these will leave a film on the parts
which is difficult to remove. We recommend the same for the chain also.
If you have to change the bearings you can order them included in a service kit at
your local SCOTT dealer or buy them with international parts number as shown
above in the specs list in a hardware store.
In case of a change of the bearings or of the rear swingarm you should contact your
local SCOTT dealer as you need special tools for disassembly and assembly.
BIKE OWNER'S MANUAL 2015 |
29
GENIUS
Advertisement
Table of Contents
