Description - Datalogic DS6100 Installation Manual

DS6100
DS6100 is provided with an Adjustable Focus System which enables the user
to freely select the most suitable reading field for his application. Focus
length can be very easily adjusted by choosing among six different positions
of the optical system.
DS6100 is easily configurable by means of the user-friendly Windows based
WinHost configuration program provided on a diskette. It is also possible to
configure the scanner either through the built-in keypad or by sending ESC
sequences from a Host computer.

1.2 DESCRIPTION

Some of the main features of DS6100 are listed below:
•
scanning speed 800 scans/sec. for standard models; higher speeds
available on request.
•
2 serial communication interfaces.
•
reads all popular codes.
•
supply voltage from 10 to 30 Vdc.
•
electrical connection through connectors or through a junction box.
•
test mode to verify the reading features and exact positioning of the
scanner without the need for external tools.
•
programmable in 5 different operating modes to suit the most various
barcode reading system requirements.
•
light source: solid state laser diode; the light emitted has a wave length of
650~680 nm. For laser safety precautions refer to the "Safety
precautions" section at the beginning of this manual.
•
low power consumption.
•
IP65 protection class of the enclosure; the reader is therefore suitable for
industrial environments where high protection against harsh external
conditions is required.
1.2 - General Features
DATALOGIC