Fox Nude Shock And Twinloc Remote Control Lever - Scott Genius LT Series User Manual

•

FOX NUDE SHOCK AND TWINLOC REMOTE CONTROL LEVER

In the drawing of the shock and remote lever, shown below, you will see the parts indicated
with numbers which will be used in the manual for the adjustment and setup.
S2 S9
S8
Parts List
S1 Front eyelet/ Shock Bolt
S2 Rear eyelet/ Shock Bolt
S3 Shock Housing
S4 Rebound-Adjuster Knob
S5 Positive Chamber Valve
S6 Remote Control Wheel
Cable Fixing Screw
S7
(hidden behind remote wheel)
S8 Shock Piston
S9 SAG Indicator (o-ring on piston)
L1 Remote Lever
L2 Release button
L3 Remote Control Cables
L4 Cable Tension Screw Fork Remote
L5 Cable Tension Screw Shock Remote
| 10 ENGLISH
S1
S3
S7
S4 S7 S5
L1 L3
L4
L2
GENIUS LT | 2016 BIKE USER MANUAL
•
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF FOX
NUDE SHOCK
To ensure perfect function of the FOX Nude shock it is very important to follow the steps
shown below exactly.
On Genius LT Carbon frames you will find an internal cable routing.
Push the inner cable first through the remote
lever in the upper cable routing of the lever and
then through the cable housing as shown below
inside the toptube.
S4
S6
L5
2016 BIKE USER MANUAL |
On Genius LT alloy frames a regular
outside cable routing, the outer
cable housing is fixed on cable
mount ports with cable zippers.
1. loosen the cable fixing screw (S7) by turning it
counter clockwise with a 2mm allen key.
2. insert a new cable via lever hole and cable
housing and push it into the shock as shown
around the remote wheel (S6).
GENIUS LT
ENGLISH 11 |