Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Scott Genius 2015
Summary of Contents for Scott Genius 2015
- Page 1 BIKE OWNER’S MANUAL 2015 All rights reserved © 2014 SCOTT Sports SA SCOTT Sports SA | 17 Route du Crochet | 1762 Givisiez | Switzerland Distribution: SSG (Europe) Distribution Center SA P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | Belgium...
-
Page 2: Table Of Contents
FOX Nude Shock and Twinloc Remote Control Lever ..... 11 All adjustments should be done at your local SCOTT dealer or following this manual’s instructions. -
Page 3: Genius Concept
Ratio TWINLOC remote control. Piston stroke 55mm SCOTT’s focus was not only on lightweight but also on a durable and stiff frame with Shock length 200mm an innovative suspension technology in combination with an optimized kinematics of (Eye to Eye) the rear swingarm. -
Page 4: Geometry/Technical Data Genius 29
50mm TRACLOC system of SCOTT. Shock length 190mm While TRACLOC allowed only the change on the SCOTT TC rear shocks between (Eye to Eye) the SCOTT patented Lock-out, traction and full-mode on the fly from the handlebar, Hardware 22.2mm x 6mm... - Page 5 SCOTT offers 2 different TWINLOC levers with following fork/rear shock combinations: 1. LOCK OUT MODE: - FOX Nude with different rolls for FOX CTD fork and RockShox DNA 3 fork (SCOTT the shock is locked; climbing on asphalt roads is now possible without any power Article number: 230097) loss.
-
Page 6: Assembly Of The Remote Cable
ASSEMBLY OF THE REMOTE CABLE FOX NUDE SHOCK AND TWINLOC REMOTE CONTROL LEVER In the drawing of the shock and remote lever, shown below, you will see the parts IMPORTANT! indicated with numbers which will be used in the manual for the adjustment and setup. Please make sure the lockout of SRAM/RockShox or FOX fork is activated after transport correctly. -
Page 7: Basic Set-Up Of The Twinloc Remote Control Of Fox Nude Shock
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF 3. tighten the cable and fix the cablefixing FOX NUDE SHOCK screw (S7) by turning it clockwise with a 2mm allen key and a max. tightening torque of 1.6Nm. To ensure perfect function of the FOX Nude shock it is very important to follow the steps shown below exactly. -
Page 8: Basic Set-Up Of The Twinloc Remote Control Of Fox Ctd Shock
BASIC SET-UP OF THE TWINLOC REMOTE CONTROL OF SET-UP GENIUS WITH FOX NUDE OR FOX CTD SHOCK FOX CTD SHOCK The assembly of the remote cable and the setup of the FOX CTD rear shock is very The Set-Up of the FOX Nude or FOX CTD Shock can be easy done within a few similar to the abovementioned assembly and setup of the FOX Nude. -
Page 9: Sag
Please refer to the following instruction: Ride your bike off a pavement (remain in the saddle) and check how many times it bounces. The SAG should be 14mm (27.5”/650B) respectively 12.5mm (29”) on the shock - If it bounces 1-2 times, the set up is good. piston. -
Page 10: Set-Up Of Other Shock Models
12.9mm PRD 13640 SCOTT strongly recommends using only the FOX Nude (FOX CTD shock) with the Genius bike, as we designed both parts for a perfect matching combination with a It is also possible to use forks with a standard 1 1/8” steerer tube when using a linear suspension rate. -
Page 11: Adjustable Bb Height
Please note that you always need to use the adapter plate attached to the bike or frame set between chainstay and front derailleur. This adapter can be ordered at the SCOTT distribution with parts number: 229728 FD Mount Genius 2013 700-650B 229729... -
Page 12: Chainguide
Details for the assembly on the alloy frames of Genius: The Carbon as well as the alloy frames of Genius can be fitted with ISCG chainguide systems. A set of all spare parts for this action can be ordered via the SCOTT distribution with: 229730 ISCG adaptor Genius 2013... - Page 13 Please make sure to respect the 40mm distance between the cables and the BB (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift cables and brake hose. The cable guide can be ordered via the SCOTT distribution with parts number: 229723 BB Cable Guide Genius (f. Carbon Frame) GENIUS | BIKE OWNER’S MANUAL 2015...
-
Page 14: Adjustment Of Seatpost-Height
In addition to the derailleur Please make sure to respect the 40mm distance between the cables and the BB cables and the brake hose you (bottom bracket) housing to avoid “ghost-shifting” and/or damages on the shift also will see a possibility for cables and brake hose. -
Page 15: Replaceable Dropout
Tech Info Chart before mentioned. This is available via the SCOTT distribution: 206473 replaceable hanger If you want to use another RWS standard SCOTT also offers after-market parts for PIVOT MAINTENANCE specific wheelsets for the following parts via the SCOTT distribution: 219574... -
Page 16: Warranty
Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely Year .