Remote Control; Battery Replacement - Bionaire BCH9300 Instruction Manual

provided screws. (Refer to Figure 1)
Step 2: Lace the power cord through the cord
minders on the underside of the base.
(Refer to Figure 2)
Step 3: Turn the heater right side up on a flat
level surface prior to beginning
operation. (Refer to Figure 3)

Remote Control

Your heater comes with a remote control, unpack
the remote control from box. This unit requires
two (2) AAA batteries, 1.5V (not included). Please
note this remote control will not work through
walls.

Battery Replacement

a) Remove battery cover from remote control.
b) Remove batteries from the remote control.
c) Insert two new batteries, pressing them
firmly into their slot.
d) Replace the battery cover.
Figure 1
Rear
Base
Power cord
Power Cord
4 Base Securing
Screws
Front Base
Figure 2
Figure 3
Control Panel
Remote Control
Assembled
Base
Figure 4
H
G
F
E
D
C
B
3
C
D
E
A LCD Display
B Oscillation Button
G
C Thermostat Button
D Timer Button
E Fan Only Button
F Heat & $ave
Button
G Power Button
H Indicator Lights
A
B
TM