Service
(continued)
11 . Use screwdriver to orient auger shaft to align with motor
shaft keyway (Fig . 29 .1) .
12 . Install key into keyway (Fig . 29 .2) .
13 . Install spacer, ensure that key is captured in slot
(Fig . 30 .1)
14 . Insert screwdriver into groove of auger shaft and pry shaft
outwards (Fig . 31 .1) .
15 . Insert retainer into groove (Fig . 31 .2), ensure that retainer
is aligned with hole in spacer .
–––––––––––––––––––––––––––––––––––––––––––––––––––
Fig . 29
Fig . 30
Fig . 31
Dispenser and Ice Machine 230 V/50 Hz and 220 V/60 Hz
2
1
1
1
2
21