Control Panel Operation Modes; Functions In The Sewing Mode - Pfaff 3574-2/02 Instruction Manual

7

Control panel operation modes

.03.02
You can select the operation modes by pressing the following keys. The selected mode can
be seen by the light emitting diode in the respective key.
SEWING mode
INPUT mode
7

Functions in the SEWING mode

.03.03
The following functions can be selected by pressing the corresponding red key.
Program stop
Interrupt sewing program.
Program start
Start sewing program or continue program following interruption.
Seam type forwards
Carry out seam type forwards step by step.
Combined with the program start key, the seam type sequence is carried out automatically.
Seam type backwards
Carry out seam type backwards step by step.
Combined with the program start key, the seam type sequence is carried out automatically.
Home position
Brings the feed carriage of the sewing jig to start position.
Presser foot up/down
The presser foot is raised/lowered and simultaneously, the feeding clamp of the sewing jig
is opened or closed.
Reset key
For acknowledging an error correction. (The key's diode is lit when there is an error
message.)
Increase allowed speed
The specified speed is increased.
Decrease allowed speed
The specified speed is decreased.
Within both of the operation modes, only certain keys are assigned functions
(see chapter 7.03.03 Functions in the SEWING mode and chapter 7.03.04
Functions in the INPUT mode).
Controls
7 - 3