Table of Contents
Advertisement
Adjustment
13
Presser foot lifting movement
.06.13
13 - 16
Requirement
With the needle bar at TDC (hole 5), the presser foot should be in its top point of reversal.
3
4
1
5
Fig. 13 - 15
Position the take-up lever in its top position and loosen screw 1.
Position the needle bar at TDC and turn eccentric 2 according to the requirement.
Position the take-up lever in its top position and tighten screw 1.
Check setting and repeat if necessary.
1
6
6
3
4
5
2
1
Advertisement
Table of Contents
