Table of Contents
Advertisement
CIRCULAR ARC
Press Enter key.
Enter
ENTER ARC SUPPORTING POINT
At the circular arc starting point, an additional supporting point as well as the
circular arc end point must be marked.
Move to supporting point (see Fig. 11-03).
Press Enter key.
Enter
ENTER ARC END POINT
Move to arc end point (see Fig. 11-03).
Press Enter key.
Enter
Select thread trimming function.
Activate quick motion function.
INSERT QUICK MOTION
Move to seam start of seam 6 (see Fig. 11-03).
INSERT END POINT QUICK MOTION
Press Enter key.
Enter
28 : CURVE END POINT
28 : CURVE END POINT
29 : CURVE END POINT
30 : ARC END POINT
31 : TRIMMING
31 : TRIMMING
31 : TRIMMING
32 : QUICK MOTION
Programming
11 - 18
Advertisement
Table of Contents
