Connecting Additional Safety Devices - Mighty Mule 200 E-Z GATE OPENER UL325 SERIES Installation Manual

Connecting Additional Safety Devices

Although GTO strongly recommends the use of additional safety devices, we do not endorse any
specific brand names. Only use products that are certified and listed to be in compliance with any
applicable UL standards (Underwriters Laboratories) and national and regional safety codes.
Call GTO Sales at 1-800-543-4283 for information on compatible
Make sure the power to the opener is turned off before connecting safety device wiring to the
terminal blocks. Unplugging the transformer does not turn power to the opener OFF.
Wiring Accessories through Wiring Knockout
products for your specific application.
Carefully remove wiring
knockout to insert
accessory wires.
Insert accessory wires
through the knockout and
route to the accessory
input terminals on the
control board.
M i g h t y M u l e 2 0 0
ON/OFF Switch
Accessory Wires
(Photo beams, keypad, etc.)
27