Section 1 - Introduction - FBII XL-1S Hookup And Installation Instructions

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
The XL-1S Security System is a state of the art microprocessor-based control/communicator.
Programming can be performed through any of the compatible keypads or the system can be
uploaded and downloaded remotely using the EZ-Mate PC Downloader Software. In addition,
remote control actions (arming, disarming, bypassing, etc.) can be performed by the software.
Programming options are stored in non-volatile reprogrammable EEPROM memory and that
information which has been programmed will not be lost in the event of a complete loss of
power. Other features of the XL-1S include:
• 5 Zones (4 fully programmable plus a wired panic zone or keyswitch zone)
• 2 types of compatible keypads (LCD & LED, four wire devices with up to four per system)
• 6 user codes with capability for ambush code
• Fast Loop Response (10 msec) selectable by zone
• NFPA 72 Bell Supervision
• CS Test Timer Offset
• English readout keypads available
• Upload/Download with remote commands with answering machine bypass
• Default Lockout option to prevent hostile account takeovers
• Indications on keypad for AC loss, Low Battery and Communication Failure
• Central Station reporting for Alarms, Troubles, Restores, Bypasses, Openings, Closings,
Ambush, Panic, 24HR. Test, Cancels, AC loss, and Low Battery
• Can be programmed as a Local System (No CS Reporting)
• 4 wire smoke detectors with Fire Verification logic plus smoke power reset
• Exit Error Warning
• European Ring Detect
• 2 programmable trigger outputs for various functions (including armed/ready indication
and glass break detector reset)
• Input Power: 12VAC 20VA; 12VDC, 4 - 7 AH
• Output Power: 11.5 - 13.1VDC, 500mA
• Bell Output Power: 10 - 15.5VDC, 1A
S E C T I O N
Introduction
1
1–1