Connect The Telephone Cord - Uniden XDECT 7015 Owner's Manual

81 Place a handset in the base and any accessory handset(s1 in the

Connect the Telephone Cord

Use the telephone cord to
connect the
TEL LINE
standard telephone wall jack.
Test the connection
11 Pick up the handset from
the cradle and press
TaLK ( )/FLaSH
hear a dial tone, and the
display should say Talk.
If...
you don't hear a dial tone or the
display says Check Tel Line
21 Make a quick test call. (Press
If...
there's a lot of noise or static
31 Test any accessory handsets the same way. If you can't get a
dial tone or the handset display says Unavailable, try moving the
handset closer to the base or resetting it (see page 201. Charge
all handsets completely (about 15 hours1 before using them.
To Mount the Base Unit on a Wall: please refer to page 24.
4
charger(s1 with the display(s1 facing forward. The
light on the base and each charger
CHarGE
should all turn on.
If...
the
CHarGE
light does
not turn on
Charge all handsets completely (about 15
hours) before using them.
jack to a
. You should
Try...
reseating the handset.
-
checking the AC adapter connection.
-
seeing if the outlet is controlled by a
-
wall switch.
Try...
checking the connection between
the base and the phone jack.
to hang up.1
END ( )
Try...
see page 19 for tips on avoiding
interference.