Installing Your Phone; Charge The Battery - Uniden XDECT 7015 Owner's Manual

Charge the Battery

11 Unpack all handsets, battery packs, and
battery covers. If any battery cover is
already on the handset, press in on the
notch and slide the cover down and off.
Black
41 Place the cover over the battery
compartment and slide it up into place.
51 Connect the base AC adapter to the
jack on the rear of the base. Route the
6V
cord through the molded wiring channel as
shown.
61 If you have accessory
handsets, connect a
charger AC adapter to each
charger's
set the plug into the notch
as shown. (These adapters
might already be
connected.1

Installing Your Phone

Red
jack and
DC IN 9V
21 Line up the red and black
wires on the battery pack
with the label inside the
handset.
31 Push the connector in until
it clicks into place; tug
gently on the wires to
make sure the battery pack
is securely connected.
DC IN
71 Plug the other end of each adapter
into a standard 240V AC power outlet.
3