Multitech FaxFinder FF240 Administrator's Manual page 72

ADVANCED CONFIGURATION
Field
Password
Confirm Password
Engine ID
SNMP Traps
Trap
FaxFinder server is up
The disk is nearing full
(reached 90% threshold
value)
The modem is stuck (multiple Issued for FFx40 modems only. If the modem occasionally gets stuck and do not
timeouts on initialization)
The network share could not Issued when FaxFinder cannot access a network share to save files.
be reached (network failure)
The SMTP server is not
reachable
Error while archiving the
faxes (the archive log is full)
The SFTP server access failed Issued when FaxFinder cannot access SFTP server while archiving the faxes.
Cannot access the SNTP
server for time
synchronization
The expander module has
been unplugged
The expander module has
been plugged in
The recent fax took a long
time
72
Description
Enter authentication password required for SNMP V3. Must be between 8-32 characters
long.
Re-enter the authentication password.
Engine ID is a unique identifier for the SNMP agent that receives SNMP traps. Engine ID
must include the 0x prefix and be a hexadecimal string between 5-32 octets long. For
example, 0x0102030405. Use the default Engine ID value generated automatically by
FaxFinder.
Description
Issued after the system completes a reboot.
Issued if empty space on the FaxFinder hard drive is less than 10%.
respond on the AT commands, the trap is issued.
Issued when an email fails when sent.
Issued when FaxFinder cannot archive file because there is no space left on device.
Issued when FaxFinder cannot access SNTP server for time synchronization.
Issued when the expansion module is disconnected from FaxFinder.
Issued when the expansion module is connected to FaxFinder.
Issued when the time between when the fax is supposed to be scheduled and
when the scheduling actually starts exceeds four hours.
®
FaxFinder Fax Server FF240, FF440, FF840 Administrator Guide