6. Reinstall the access cover with two bolts. Tighten the bolts to
the specified torque.
a
a -
Access cover
Description
Access cover bolt
Propeller Installation
PROPELLER INSTALLATION - 108 MM (4-1/4 IN.) DIAMETER
GEARCASE
Rotating propellers can cause serious injury or death. Never
operate the boat out of the water with a propeller installed. Before
installing or removing a propeller, place the drive unit in neutral
and engage the lanyard stop switch to prevent the engine from
starting.
OUTBOARD INSTALLATION
WARNING
!
Nm
lb. in.
10
89
120
28500
lb. ft.