Mercury 50 4-Stroke Manual page 127

OUTBOARD INSTALLATION
2. Fit the throttle cable through the rubber grommet.
a - Rubber grommet
3. Attach the throttle cable to the throttle lever with a cotter pin
retainer.
4. Adjust cable barrel until the barrel slips onto the mounting
stud.
5. Fasten the throttle cable to the mounting stud with a flat
washer and locknut. Tighten the locknut to the specified
torque.
a
a - Throttle cable
b - Cotter pin retainer
c - Flat washer
Description
Throttle cable locknut
a
b
b c
d
b - Throttle cable
d - Locknut
e - Cable barrel
Nm
6
119
28491
e
28494
lb. in.
53
lb. ft.