This model has an anode installed on each side of the gearcase and one on the bottom of the transom
bracket assembly.
a -
Anode on transom bracket assembly
Propeller Replacement
Rotating propellers can cause serious injury or death. Never operate the boat out of the water with a
propeller installed. Before installing or removing a propeller, place the drive unit in neutral and engage
the lanyard stop switch to prevent the engine from starting. Place a block of wood between the
propeller blade and the anti-ventilation plate.
1.
Shift the outboard to the neutral ("N") position.
2.
Remove the spark plug leads to prevent engine from starting.
MAINTENANCE
a
WARNING
!
N
b
b -
Gearcase anodes
N
28528
26899
52
32211