Specifying Settings For The Paper Loaded Into The 1St Paper Drawer ("Tray1 Paper" Parameter) - Olympia Omega 1640 User Manual

Specifying settings for the paper loaded into the 1st paper drawer ("TRAY1 PA-
PER" parameter)
1
Display the "PAPER SOURCE SETUP" menu.
– Refer to "Displaying the "PAPER SOURCE SETUP" menu" on page 6-19.
2
Press the [+] or [,] key until "TRAY1 PAPER" is selected, and then press the
[OK] key.
– To specify the paper size, continue with step 3.
– To select the paper type, continue with step 5.
3
Press the [+] or [,] key until "PAPER SIZE" is selected, and then press the
[OK] key.
6-22