Changing The Print Density ("Print Density" Parameter) - Olympia Omega 1640 User Manual

Changing the print density ("PRINT DENSITY" parameter)

1
Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 6-6.
2
Press the [+] or [,] key until "PRINT DENSITY" is selected, and then press
the [OK] key.
3
Press the [*] or [)] key until the desired density level is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
6-13