Table of Contents
Advertisement
Windshield washer – fluid level
1 Fluid level check
Check the washer fluid level through level check
window
.
When the level has dropped to the lower part of the
window or is not visible at all, refill the tank with
washer fluid.
Z21416
2 Refilling
1. Open the assistant driver's door.
2. Open windshield washer tank cap
a mixture of windshield washer fluid and tap
water until the level reaches the top of the check
window.
3. Close the cap tightly after refilling.
Windshield washer fluid
quantity
CAUTION
•
Substituting soapy water for washer fluid
could result in clogged washer nozzles or
spots on painted surfaces.
•
Operating the washer continuously for more
than 20 seconds or when there is no fluid in
the reservoir could burn out the washer
motor.
NOTE:
When it is very cold, the ratio of windshield washer
fluid to water should be increased in order to pre-
vent the mixture from freezing up.
check and refilling
Approx. 3.0 liters
(3.2 qts)
12-81
and pour in
Advertisement
Table of Contents
