Mercury 40 Jet Manual page 54

1. Turn out the manual tilt release valve three turns
counterclockwise. This allows manual tilting of the outboard.
Tilt the outboard to the desired position and tighten the manual
tilt release valve.
NOTE: The manual tilt release valve must be tightened before
operating the outboard to prevent the outboard from tilting up
during reverse operation.
AUXILIARY TILT SWITCH
The auxiliary tilt switch can be used to tilt the outboard up or down
using the power trim system.
a - Auxiliary tilt switch
FEATURES & CONTROLS
a
26809
28534
46