Preset Programming And Playback - High End Systems SolaSport Pro 2000 User Manual

Preset Programming and Playback

SolaSpot Pro 2000 fixtures can be programmed through the on board menu system using Preset Programming.
This section describes how to program your fixtures for stand-alone operation using the on-board memory in each
fixture to create and store scenes.
Preset Programming Overview
Presets are built from combining scenes into programs and then assigning the programs to Program Partitions for
playback by a fixture designated as the Master and, if desired, groups of slave fixtures assigned to a Program Par-
tition. SolaSpot Pro 2000 fixtures ship with factory programmed scenes and programs ready for you to use or edit.
Creating presets consists of performing the following steps:
Designating a fixture as the Master
l
Selecting/Editing Scenes
l
Sequencing Scenes into Programs
l
Sequencing Programs into Program Partitions
l
Configuring slave fixtures on the link to playback a Program Partition from the master
l
Navigating to the Preset Menu
To enter the Preset Menu:
Press the [MODE/ESC] button to enter the first level of the menu system. The display will show Address and Info as the first
l
two options in the top menu level.
The red star [*] indicates the current menu.
l
Using the [UP],[DOWN] buttons, scroll to Preset.
l
Press the [Enter] button to select.
l
Master and Slave
The following example shows the relationship between scenes, programs and partitions
programmed on the Master and how slave groups are assigned.
Groups of scenes are edited into Programs 1– 6 on the fixture designated as Master
l
Program 2 is assigned to Part 1
l
Program 4 is assigned to Part 2
l
Program 6 is assigned to Part 3
l
Fixtures assigned as Slave 1 playback Part 1
l
Fixtures assigned as Slave 2 playback Part 2
l
Fixtures assigned as Slave 3 playback Part 3
l
Scene 4 Scene 5 Scene 6 Scene 7
l
38