Fixture Control Board
The Control Board offers several features: you can simply set the starting address , run the pre-programmed program or make
other changes.
The main menu is accessed by pressing the [Mode / ESC] button until the display is visible.
Browse through the menu by pressing the [UP] button ,[Down] button , [Left] button or [Right] button.
Press the [Enter] button in order to select the desired menu.
You can change the selection by pressing the directional buttons. ie. the [UP] button ,[Down] button , [Left] button or [Right]
Confirm every selection by pressing the [Enter].
You can leave every mode by pressing the [Mode / Esc ]button.
The functions provided are described in the following sections. The menu item will disappear after 10 seconds after the last key
press. The functions provided are described in the following sections.
23