Always disconnect from power, when the device is not in use or before cleaning it. Only handle the power cord by the plug.
l
Never pull out the plug by tugging the power cord.
Don't project the beam onto combustible substances, this could cause a safety hazard and/or start a fire.
l
Please be aware that damages caused by modifications to the fixture will void warranty.
l
Keep away from children and non-professionals.
l
Maintenance should be performed by a qualified individual.
l
There are no serviceable parts inside the device. The following points have to be considered when inspecting the fixture for
l
maintenance:
All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded.
l
Mechanically moved parts must not show any traces of wear and must not rotate freely without unbalance.
l
The electric power supply cables must not show any damage, material fatigue or excessive dirt.
l
15