Edit Scenes
With this function, you can edit the scenes of the internal programs.
Rec. Controller
This fixture features an integrated DMX-recorder by which you can transmit the programmed scenes from your DMX-controller to
the fixture. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
Example:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units, which run 3
different programs. The Master unit sends the 3 program parts in a continuous loop.
To start a Auto Program please proceed as follows:
1. Slave-Setting:
• Select "Function Mode" by navigating with the arrow key.
• Press the Enter button to confirm.
• Select "Set to slave" by navigating with the arrow key.
• Press the Enter button to confirm.
• Select "Slave 1", "Slave 2" or "Slave 3".
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
2. Automatic Program Run
• Select "Function Mode" by navigating with the arrow key.
• Press the Enter button to confirm.
• Select "Auto Program" by navigating with the arrow key.
• Press the Enter button to confirm.
• Select "Master" or "Alone". The selection "Alone" means Stand Alone-mode and "Master" that the device is defined as master.
• Press the Enter button to confirm.
• Press the MODE/ESC button in order to return to the main menu.
3. Program selection for Auto Pro Part
• Select "Edit program" by navigating with the arrow key.
• Press the Enter button to confirm.
• Select "Select programs" by navigating with the arrow key.
35