Table of Contents
Advertisement
Control Board Functions
Address
With this function, you can adjust the desired DMX start address via the Control Board.
1．Access the main menu.
2．Tap the <Up/Down>button until"Address"is displayed.
3．Press ENTER, the display will show "Address".
4．Tap the <Up/Down>button， the display will show "A001~AXXX"
5．Press ENTER to confirm or press <MODE/ESC> to return to the main menu
Time Info
Current Time
With this function, you can display the running time from last power on. The display shows "XXXX", "XXXX" stands for the number of
hours. The counter is reset after power-off.
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until "Info"is displayed. Press ENTER, the display will show "Info.".
l
Tap the <Up/Down>button until the display will show "Time Info.".
l
Press ENTER, the display will show "Time Info.".
l
2．Press <Up/Down>, the display will show "Current Time".
3．Press< ENTER>, the display will show "Current Time".
4．The display will show "XXXX" (Hours) ；
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Ttl Life Hrs
With this function, you can display the total running time of the fixture. The display shows "XXXX", "XXXX" stands for the number of
hours.
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until "Info"is displayed. Press ENTER, the display will show "Info.".
l
Tap the <Up/Down>button until the display will show "Time Info.".
l
Press ENTER, the display will show "Time Info.".
l
2．Press <Up/Down>, the display will show "Ttl Life Hrs".
3．Press< ENTER>, the display will show "Ttl Life Hrs".
4．The display will show "XXXX" (Hours) ；
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Run Hrs
With this function, you can display the last running time of the fixture. The display shows "XXXX", "XXXX" stands for the number of
hours.
1．Tap <MODE/ESC>button， access the main menu，
25
Advertisement
Table of Contents
