Head Temp.
With this function you can display the temperature on the display board of the base (near CMY-filter) in Celsius.
1.Tap <MODE/ESC>button, access the main menu,
Tap the <Up/Down>button until"Info"is displayed.
l
Press ENTER, the display will show "Info".
l
2.Press <Up/Down>, the display will show "Head Temp.".
3.Press< ENTER>, the display will show "Head Temp.".
4.The display show "XXX °C/ °F".
5.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Fan Speed
With this function you can display the RPM of various fans inside the fixture.
1.Tap <MODE/ESC>button, access the main menu,
Tap the <Up/Down>button until"Info"is displayed.
l
Press ENTER, the display will show "Info".
l
2.Press <Up/Down>, the display will show "Fan Speed.".
3.Press< ENTER>, the display will show "Fan 1: xxx RPM", Fan 2: xxx RPM" ...."
4.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Software Ver
With this function, you can display the software version of the device.
1.Tap <MODE/ESC>button, access the main menu,
Tap the <Up/Down>button until"Info"is displayed.
l
Press ENTER, the display will show "Info".
l
2.Press <Up/Down>, the display will show "Software Ver".
3.Press< ENTER>, the display will show "Software Ver".
4.The display show "Ver x.x".
5.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Set
Status
No DMX Mode
With this function, when DMX is not connected, it runs automatic, closed, hold and music. The default is hold.
1.Tap <MODE/ESC>button, access the main menu,
Tap the <Up/Down>button until"Set"is displayed.
l
Press ENTER, the display will show"Set".
l
Tap the <Up/Down>button until the display will show "Status".
l
Press ENTER, the display will show "Status".
l
2.Press <Up/Down>, the display will show "No DMX Mode".
3.Press< ENTER>, the display will show "No DMX Mode".
28