General Guidelines
This device is a lighting effect for professional use on stages, theaters, or other professional installations, etc., the device was
l
designed for indoor use only.
This fixture is only allowed to be operated with the max alternating current (AC Voltage) which stated in the technical spe-
l
cifications printed on the fixture.
Lighting effects are not designed for permanent operation. Operation breaks ensure that the device will perform longer
l
without failure
Do not shake the device.Avoid brute force when installing or operating the device.
l
While choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust.
l
Please don't project the beam onto combustible substances.The minimum distance between light-output from the projector
and the illuminated surface must be more than 0.5 meter or 1.6 ft.
If you use the quick-lock cam to hang this fixture, be sure to properly insert the fasteners in the quick lock holes correctly. Do
l
not hang this fixture without a safety cable.
Operate the device only after having familiarized with its functions. Do not permit operation by unqualified persons, damages
l
can occur due to unprofessional operation.
Please use the original packaging if the device is to be transported.
l
For safety reasons, please be aware that all modifications on the device are forbidden.
l
If this device will be operated in any way different to the one described in this manual, the product may suffer damages and
l
the warranty becomes void. Furthermore, misuse may lead to short-circuit, burns, electric shock, lamp explosion, crash, and
other damage to the fixture or persons.
16