Table of Contents
Advertisement
With this function, you can display the timer password. The time password is 038.
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until "Info"is displayed. Press ENTER, the display will show "Info.".
l
Tap the <Up/Down>button until the display will show "Time Info.".
l
Press ENTER, the display will show "Time Info.".
l
2．Press <Up/Down>, the display will show "LED Time PIN".
3．Press< ENTER>, the display will show "LED Time PIN", the time password is 038.
4．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Clean LED Time
With this function, you can clear the running time of the LED engine (this should not be done unless an engine has been repaced)
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until "Info"is displayed. Press ENTER, the display will show "Info.".
l
Tap the <Up/Down>button until the display will show "Time Info.".
l
Press ENTER, the display will show "Time Info.".
l
2．Press <Up/Down>, the display will show "Clean LED Time".
3． At "Timer Password" prompt, input a correct password, press< ENTER>, the display will show "Clean LED Time",
4. The display will show "Off" or "On"
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Value Displayed
NONE
With this function, you can choose to turn off display of DMX Control channel values.
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until"Info"is displayed.
l
Press ENTER, the display will show "Info".
l
2．Press <Up/Down>, the display will show "Value Disp".
3．Press< ENTER>, the display will show "Value Disp".
4．The display show "None".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
ALL, PAN
With this function you can display the DMX 512 value of each channel. If all is selected, the display will automatically show a channel
that is changing.
1．Tap <MODE/ESC>button， access the main menu，
Tap the <Up/Down>button until"Info"is displayed.
l
Press ENTER, the display will show "Info".
l
2．Tap the <Up/Down>button until"Value Disp"is displayed.
3．Press ENTER, the display will show "Value Disp".
4．Tap the <Up/Down>button， choose each channel.
5．Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
27
Advertisement
Table of Contents
