Safety Considerations
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability
for any resulting defects or problems.
Warnings
If the fixture has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The
l
condensation that could form could cause internal damage. Leave the fixture switched off until it has reached room tem-
perature.
This fixture falls under protection-Class I. Therefore it is essential that the device be earthed.
l
The electrical connection must carry out by a qualified person.
l
Make sure that the available voltage is within stated range.
l
Make sure the power cord is never crimped or damaged by a sharp edge. Replace cable immediately if damaged, this work
l
must be done by an authorized dealer.
14