Adjustment Of Seatpost-Height - Scott Genius LT Owner's Manual

In order to seal the housing ports on the frame you
should use the plugs attached to the bike.
The cable guide can be ordered via the SCOTT distribution with parts number:
229723 BB Cable Guide Genius (f. Carbon Frame)
ALLOY FRONT FRAMES
Please fix the derailleur cable housings,
the brake hose and the remote seatpost
cable housing (if applicable) on the
frame on the cable mounts with the
mount clips by following the routing info
as shown below:
26
GENIUS LT | BIKE OWNER'S MANUAL 2015
Please secure the clamps
with a cable zipper
as shown:
Please secure the clamps with
maximum 4Nm/35in-lbs as shown
Please make sure to respect the 40mm distance between the cables and the BB
(bottom bracket) housing to avoid "ghost-shifting" and/or damages on the shift
cables and brake hose.
229724 Cable Clamping Set Genius alloy 2013 one size
IMPORTANT!
Please make sure to respect the 40mm distance between the cables and the BB
(bottom bracket) housing to avoid "ghost-shifting" and/or damages on the shift
cables and brake hose.

ADJUSTMENT OF SEATPOST-HEIGHT

IMPORTANT!
The seatpost has to be inserted into the seattube at a minimum of 100mm.
Never use another seatpost diameter than 31.6mm or try to use a shim/reducer
between seatpost and frame.
BIKE OWNER'S MANUAL 2015 |
27
GENIUS LT