Genius Lt Cable Routing - Scott Genius LT Owner's Manual

GENIUS LT CABLE ROUTING

The direct and straight cable system on all our full suspension models offers perfect
shifting performance combined with lightweight and high resistance against water
and dirt.
CARBON FRONT FRAMES
The carbon frames of Genius LT have an internal shifting cable routing with cable
stops on the front end of the downtube as shown in the diagram.
FD: Front derailleur
RD: rear derailleur
BR: rear brake
SP: seatpost remote
Insert the cables into the
headtube as shown:
Guide the seatpost remote cable upwards to the seatpost inside the frame (stealth)
or pull it out on the rear-side of the seattube.
Push the cable port parts into the frame and fix the port with a 3mm allen key with a
maximum torque of 4Nm/35in-lbs
24
GENIUS LT | BIKE OWNER'S MANUAL 2015
Pull the cables out in the BB area:
Headtube section:
Please make sure to respect the 40mm distance between the cables and the BB
(bottom bracket) housing to avoid "ghost-shifting" and/or damages on the shift
cables and brake hose.
For the rear brake please assemble the cable as
shown in the following drawings:
Please keep in mind to have a minimum distance
of 40mm between the brake hose and the BB
housing as abovementioned!
Please fix the brake hose and the remote
seatpost cable housing (if applicable) on the
frame on the cable mounts with the mount clips
by following the routing info as shown:
BIKE OWNER'S MANUAL 2015 |
BB section:
USE PLASTIC GUIDE TO FIX THE BRAKE CABLE
25
GENIUS LT