Advertisement
4.
Insert the grip power
contacts into the camera's
battery
chamber
shown. Make sure to align
the camera's tripod socket
with the mounting screw.
When removing the grip, turn the camera power off, remove batteries, and replace protective contact cap.
5.
Rotate
the
wheel in the direction
as
shown by the arrow until
it is firmly tightened.
7
6.
Connect
Cable from the socket on the
end of the battery grip to the
remote release port on the
Canon T3 body.
attachment
Look for this symbol to locate the jack
for connecting remote devices.
7.
Insert the batteries (may be
used with only one battery),
turn the camera on, and check
the battery level on the LCD
or viewfinder.
Shutter
Release
Advertisement
