Page 1
BG-C14 BATTERY GRIP Designed for the Canon 5D Mark IV SLR Camera...
Page 2
The Vello BG-C14 is compatible with the Canon 5D Mark IV SLR camera. The BG-C14 accepts up to two Canon LP-E6 or LP-E6N rechargeable batteries. This grip is equipped with an alternate shutter release button,...
Page 3
Remove batteries from the grip when not in use. Cover the power terminals with the contact cap Do not attempt to disassemble. when the BG-C14 is not in use. This prevents electrical shorts caused by metal objects touching Avoid water or extreme humidity, and keep in a dry the power terminals.
Page 5
Multi-controller Button* Communicate with the camera Your camera will continue to draw electronics. AF Point Selection* power from the BG-C14 when the Mounting Screw switch is in the OFF position. Unlock AE Lock* Aligns with the camera’s tripod socket. prior to use by switching to the ON Guide Pin position.
Attaching the Grip Ensure that the power is O p e n t h e c a m e r a Slide the camera battery turned off on the camera battery chamber cover, chamber cover’s locking and that the power switch and remove the battery pin, as indicated above, and is set to OFF on the battery...
Page 7
To prevent loss, remove the Connect the BG-C14 grip Rotate the at tachment protective cap and place the to the camera. wheel in the direc tion camera battery chamber shown by the arrow until it cover into the BG-C14 is firmly tightened.
Inserting Batteries Ensure that the power is Canon LP-E6 or LP-E6N Household Power Outlet: turned off on the camera Batteries: Inser t up to T h e C a n o n AC K- E 6 and the grip. Use your two batteries by placing AC Power Adapter Kit fingernail to protrude the...
Page 9
Rotate the battery tray lever counterclockwise, Switch the grip power to ON, and then turn on and slide the battery tray all the way into the grip. the camera’s power. Check the battery level in Rotate the lever as indicated above, and push the the control panel or viewfinder.
Specifications One or two Canon LP-E6 or LP-E6N rechargeable batteries Power Source Works with the Canon AC Adapter Kit ACK-E6 (sold separately) Operating Temperature 32°F–104°F (0°C–40°C) Dimensions 5.9 × 4.6 × 3.3 in. (15.0 × 11.7 × 8.5 cm) Weight 10.9 oz.
ONE-YEAR LIMITED WARRANTY This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.