Safety Information - Extech Instruments 382065 User Manual

Safety Information

1. Read the following safety information carefully before attempting to operate or service
the meter.
2. Read all operating instructions before use.
3. To avoid damage to the instrument do not exceed the published input limits.
4. Do not use the meter or test leads if they appear damaged. Use extreme caution when
working around bare conductors or bus bars. Accidental contact with a conductor could
result in electric shock.
5. Use the meter only as specified in this manual otherwise the protection provided by the
meter may be impaired.
6. Use caution when working with voltages above 60VDC or 30VAC RMS. Such voltages
pose a shock hazard.
7. Before taking resistance or continuity measurements, disconnect the circuit from the
main power supply and disconnect all loads from the circuit.
8. Safety Specifications:
• Installation categories III
• Pollution degree 2
• Altitude: 2000m max
• Indoor use only
Safety symbols
Caution: Refer to this manual before using the meter.
Dangerous voltages.
Meter is protected throughout by double insulation or reinforced insulation.
When servicing, use only specified replacement parts.
Complies with EN-61010-1, IEC 1010-2-32
www.burntec.com
Model 382068 V3.0 4/2005
5