Changing The High Limit Safety Cut-Out Setting (If Required) - Viessmann VITOTRONIC 100 Installation And Service Instructions Manual

Installation sequence

Changing the high limit safety cut-out setting (if required)

Adjustment to 100 °C (EGO and JUMO)
The high limit safety cut-out is set to 110 °C in the delivered condition.
Note
This EGO setting change is irreversible!
When adjusting the temperature to 100 °C, do not adjust the control thermostat
above 75 °C.
A EGO slotted screw B JUMO slotted screw
Conversion to 100 °C at T&G
The high limit safety cut-out is set to 110 °C in the delivered condition.
9