Using Your Sear Burner; Using Your Searing Side Burner - KitchenAid 720-0733D Installation Instructions And Use & Care Manual

Lighting the Searing Burner
1. Open the searing side burner cover. Do not light burners
with the cover on.
2. Do not lean over the grill.
3. Push in and turn the grill control knob to IGNITE/HIGH, while 3 Push in and turn the grill control knob to IGNITE/HIGH while
continuing to hold it in.
IMPORTANT: If burner does not light immediately, turn the IMPORTANT: If burner does not light immediately turn the
burner knob to OFF and wait 5 minutes before relighting.

Using Your Searing Side Burner

Manually Lighting The Searing Side burner
1. Open the hood completely. Do not light burners with the
2. Do not lean over the grill.
3. Remove the manual lighting extension (see the following
4. Strike the match to light it.
5. Hold the lit match close to the searing side burner.
6. Push in and turn the control knob to IGNITE/HIGH.
For the burner closest to the lit match. The burner
will light immediately. When burner is lit. turn knob
to desired setting.
7. Repeat steps 3 through 6 for each burner.
8. Remove the match and replace the manual lighting
IMPORTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them manually,
contact the Customer Service Center. See the ''Assistance''
section.
hood closed.
illustration) and attach a match to the split ring.
extension on the right side panel.
25