Table of Contents
Advertisement
Painted, plastic and metal finish
parts
&
DOOR FRAME
HANDLE
Only use a clean cloth wrung out in
hot soapy water.
CLEANING
,
CONTROL KNOB
Stainless Steel surfaces (stainless
steel finish models only)
,
FACIA PANEL
Only use a clean cloth wrung out in hot
soapy water, and dry with a soft cloth.
Stubborn marks can be removed using
"Luneta".
We recommend that you
clean the whole of the stainless steel
area to maintain a uniform finish.
Supplies can be purchased from the
Customer Care Centre.
Do not use undiluted bleach or any
products containing chlorides as they
can permanently damage the steel.
Extra care should be taken when cooking
food in salted water. Some foods are
corrosive - eg; vinegar, fruit juices and
especially salt - they can mark or
damage stainless steel if they are left
on the surface. Turn off and wipe any
spillage immediately, taking care to
avoid skin contact with any hot surface
or spillage.
Sharp objects can mark the surface of
stainless steel, but marks will become
less noticeable with time.
To maintain the finish of the stainless
steel, or to remove any greasy marks,
wipe the stainless steel surface sparingly
with a minimum amount of "Johnson's
Baby Oil" and kitchen paper.
Do not use cooking oils, as these may
contain salt, which can damage the
stainless steel surface.
20
,
HANDLES
DOOR PANELS
Hide quick links:
Advertisement
Table of Contents
