Battery Charging - UTStarcom cdm7126 Manual

BATTERY USAGE

BATTERY CHARGING

POWER CONNECTION
1.
Plug the AC Charger into a standard outlet.
2.
Plug the other end of the AC Charger into the charging port on your
the upper side of your phone. The battery must be installed onto the
phone to work properly.
• When you charge the battery with the phone powered off, you will
Hot Key
see a charging status screen. You cannot operate the phone until it is
powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered
off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the
battery.
14