Description - Hilti SD 4500 Operating Instructions Manual

2. Description

2.1 Use of the power tool as intended
The SD 4500 is a hand-held, corded power tool for pro-
fessional use in the drywall installation trade.
en
The SD 2500 is a hand-held, corded power tool for pro-
fessional use in the woodworking and drywall installa-
tion trades.
These power tools are used for driving and removing
the recommended types of screws in the correspond-
ing materials of the specified thickness.
2.2 Main applications
Application
Fastening drywall panels to metal
profiles (track) ≤ 0.88 mm/ 20 ga
Fastening drywall panels to metal
profiles (track) ≤ 2.25 mm/25–16 ga
Fastening metal profiles to metal
profiles (max. total thickness
2.5 mm /13–12 ga)
Fastening drywall panels to wood
Fastening drywall panels to metal
profiles (≤ 0.88 mm / 20 ga)
and wood frames
Fastening chipboard (particle
board) to wood frames
Fastening:
Wood to wood
Wood to chipboard
Chipboard to wood
Screws up to 140 mm (5
Fastening wood to metal
Steel grade: ST 37 up to 12 mm (
Steel grade: ST 52 up to 8 mm (
Items supplied as standard with the SD 4500
– Power tool
– Depth gauge
– Belt hook
– S-BH 75 M bit holder, S-B PH2 DRY bit
– Operating instructions
– Cardboard box
2
Printed: 07.07.2013 | Doc-Nr: PUB / 5070548 / 000 / 00
Screw type / diameter in mm
Needle-point drywall screws,
type S-DS 01
Drill-point drywall screws,
type S-DD 01
Special drywall screws with drill point,
type S-DD 02 und S-DD 03
Needle-point drywall screws,
type S-DS 03
Needle-point drywall screws,
type S-DS 14
Needle-point drywall screws,
Typ S-DS 03
Wood screws
1 ⁄ in) in length
2
Self-drilling wing screws with drill point,
1 ⁄ in) type S-WW
2
⁄ in)
1
3
The SD 4500 and SD 2500 are designed to be used in
conjunction with a screw magazine (SMI 55 plus) and
tool extension (SME) if desired.
The power tools are intended for use on construction
sites of all kinds for applications in the drywall installa-
tion and woodworking trades.
Only the specified screwdriving bits, magazine and
accessories should be used with the power tools.
The general safety precautions listed in the operating
instructions must be observed.
Items supplied as standard with the SD 2500
– Power tool
– Depth gauge
– Belt hook
– S-BH 75 M bit holder, S-B PH2 DRY bit
– Operating instructions
– Cardboard box
SD 4500 SD 2500
X
X
X
X
X
X X
X X
X