Table of Contents
Advertisement
installation
|
14
STAINLESS STEEL SMOKE DEFLECTOR INSTALLATION
The stainless smoke deflector is located in the upper front area of the firebox. The deflector is held in place with 2 bolts
Prior to the first fire, ensure deflector is seated properly and secured with 2 hand tightened bolts.
Smoke deflector
Smoke deflector is installed through the door
opening in location shown in diagram
To replace the deflector, loosen off both bolts and slide defector upward and out. Install new defector and hand tighten bolts. Ensure positive location of
the defector prior to hand tightening.
WARNING: Operation of the unit with out proper installation of smoke deflector will void warranty.
14 |
Regency CI1200 / CI1250 Wood Cast Insert
Ensure defector is seated so bolts are situated
at the top of the keyhole before tightening.
Advertisement
Table of Contents
