Table of Contents
Advertisement
PH Gas Logs
Label all wires prior to disconnection when servicing controls.
Wiring errors can cause improper and dangerous operation.
Verify proper operation after servicing.
Wall
Switch
On/Off Switch
Figure 15 -
Wiring Diagram
The millivolt valve is a self-powered combination gas control
THAT DOES NOT REQUIRE 110 VAC TO OPERATE.
CONNECT OPTIONAL WALL SWITCH OR
THERMOSTAT
1. Use 18 AWG, two-wire cable, 20 feet maximum
length.
2. At one end of the cable, connect both wires to the wall
switch or thermostat. At the other end, connect one wire
to TP/TH and one wire to TH. The color of the wires
does not matter. Or you can hook the wall switch or
thermostat to wires on the unit.
14
TH = 3
TP = 1
TP/TH = 2
Switch
ELECTRICAL WIRING - MILLIVOLT
On/Off
Switch
ODS Pilot
Millivolt
Valve
Spade Terminal
Optional Wall
Switch, Remote
Receiver or
Optional T-Stat
ODS Pilot
FP2112
65D2035
Advertisement
Table of Contents
