Quick Power On Self Test; Boot Sequence; Boot Up Floppy Seek; Boot Up Numlock Status - Multitech CommPlete RAS96 User Manual

RAS96 RASCard User Guide
CPU Internal Cache/External Cache
These two categories speed up memory access when enabled.
Enabled
Disabled

Quick Power On Self Test

This category speeds up the power-on self-test (POST) after you power up the
computer. If it is set to Enable, BIOS will shorten or skip some check items during
POST.
Enabled
Disabled

Boot Sequence

This category determines which drive to search first for the disk operating system (i.e.,
DOS). Default value is A, C.
C, A
A, C

Boot Up Floppy Seek

During POST, BIOS will determine if the floppy disk drive installed is 40 or 80 tracks.
360K type is 40 tracks, while 760K, 1.2M and 1.44M are all 80 tracks.
Enabled
Disabled

Boot Up NumLock Status

This allows you to determine the default state of the numeric keypad. By default, the
system boots up with Num Lock on.
On
Off
Boot Up System Speed
Selects the default system speed—the normal operating speed at power-up. This
category no longer has a function and should be left at the default setting of High.
High
Low
28
Enable cache (Default).
Disable cache.
Enable quick POST.
Normal POST (Default).
System will first search for hard disk drive, then floppy disk drive.
System will first search for floppy disk drive, then hard disk drive.
BIOS searches the floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS cannot differentiate the 720K, 1.2M and
1.44M drive types, as they are all 80 tracks (Default).
BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if the
drive installed is 360K.
Keypad is number keys.
Keypad is arrow keys.
Set the speed to High (Default).
Set the speed to Low.
CommPlete Communications Server