Multitech Multi-Tech FaxFinder FF120 Administrator User Manual page 160

Chapter 7: Device Manager Operation
Viewing Parameters of a Selected Device . If you double-click on a device in the list in the Auto-
Discovery Monitor's main screen, another screen with details about that device will appear. That second
screen specifies the device's Mac Address, IP-related parameters, and presents blank fields for its
Username (User ID), and password.
Changing Parameters of a Selected Device . If a device has been discovered, you can reset its
Username (User ID) and Password to their default values ( admin and admin ) using the Reset UID/PWD
button. You can also change the "IP Address," "Subnet Mask," and "Gateway IP" fields for the selected
device. You must enter a valid User ID and password to the Fax Finder server to change any of these
fields. To finalize the changes to any of these parameters, click Update . After the changes are made, the
main Auto Discovery Monitor screen will return.
Clicking Finished will simply close the Auto Discovery Monitor screen.
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 160