LG LNB5220 Owner's Manual page 14

1/10 000 1/5 000 1/2 500 1/1 500 1/1 000
1/700
1/300
Maximum
Shutter
1/120
1/25
1/2
> Flickerless: Remove the band noise caused by fluorescent light.
Note:
When the [IRIS] is set to [Manual], if the surrounding area is
bright, can be seen flicker even if the [Flickerless] is set.
In this case, set the [IRIS] to the [Auto].
• Default: Click this button to restore the IP device back to original
factory settings.
14
1/500 1/480 1/400 1/360
1/250 1/240 1/180 1/150
1/100 1/60 1/50 1/30
1/20 1/15 1/8
2/3 1 1.5
White Balance
1/4
2
> Mode: Select [Mode] option on the [White Balance] menu, then
select the following mode.
- Auto: Adjust the white balance of the full image area. Use
this function in the environment by special lighting lamp.
Note:
When a monochromatic object is caught on camera, the
object may seem faded.
In case of this, it is recommended to set to [ATW] mode.
- Manual: You can set the white balance options manually. If
the [Mode] option set to [Manual], [Red] and [Blue] are
displayed.
- ATW (Auto-Tracing White Balance): Adjust the white balance
by tracing the white area.
In the following conditions, may not work properly:
1. When the scene contains mostly high color temperature
objects, such as a blue sky or sunset.
2. When the scene is dim.
- ONE PUSH: If you select the [ONE PUSH] mode, you will be
able to set up the White Balance automatically.
> Red: Set the desired red value.
> Blue: Set the desired blue value.
> Color Temp: If the [Mode] option set to [ATW], this option is
displayed. Click to select the option.
- Indoor: Adjust the white balance according to the indoor
environment.
- Outdoor: Adjust the white balance according to the outdoor
environment.
• Default: Click this button to restore the IP device back to original
factory settings.
Operation and settings