Table of Contents
Advertisement
MultiModemDSVD User Guide
To Answer a DSVD Call Using the Headset (MT5600DSDV only)
1. In the terminal window of your communications application, type AT and press
2. Type AT&F and press E
3. Type AT-SMS=1#VLS=5 and press E
4. When the modem responds by displaying RING on the screen, type ATA and
5. You will hear some high pitched tones, then a static-like sound after the remote
6. To hang up, type +++ATH and press E
Multi-Tech Systems, Inc.
E
. The modem will respond with OK.
NTER
press E
to answer the call.
NTER
modem picks up your call. You will see a CONNECT response on your terminal.
You can then send data to the remote modem and talk to the remote user by
speaking into the microphone
to reset the modem to its default configuration.
NTER
to enable DSVD mode using the headset.
NTER
.
NTER
3 Operation
26
Advertisement
Table of Contents
