Table of Contents
Advertisement
A
B
C
English
SPECIAL
MAINTENANCE
WARNING: before carrying out
maintenance, disconnect the
power supply to the machine.
Special maintenance must be perfor-
med authorized personnel only.
Tampering by non-authorized per-
sonnel can compromise machine
operation and relieves manufacturer
from every liability.
HEAD HINGE PIN
CLEARANCE
ADJUSTMENT
If there are strange vibrations during
the cutting phase check the clearance
between the head hinge pin (1) and
the bronze bearings (2).
The adjustment is carried out by tur-
ning the flow regulating screws (3).
VICE GIB
ADJUSTMENT
The clearance adjustment between
the vice carriage (4) and the machi-
ne's base (5) is obtained by untighte-
ning the nuts (6) and acting on the
screws (7) which directly move the
flat gib (8).
3.1.3
Hide quick links:
Advertisement
Table of Contents
