Menu Charge - GRAUPNER POLARON EX-1400 Operating Instructions Manual

Input of an individual battery name
Tap the top box while continuously until an input keyboard for entering a battery name appears.
11:12:13
Battery NAME
AM Field
BATTERY NAME
„BATTERY NAME" field of the battery name
A B C D E
A
abc / 123 / ABC
F G H I J
Spc (Space)
K L M N O
Del (Delete)
P Q R S T
Clr (Clear)
U V W X Y
Z
For data input screen, turn back by pressing the left down ESC button.
abc Spc Del Clr
The parameters in the input fields "battery type, cell number" "battery capacity"
change when activated by tapping the desired parameter field with the INC /
DEC buttons placed at the bottom of the display.
CH1 CH2
Within a memory field your settings will be taken from the "upper" setting in the
"lower" data area after tapping the lower space field and alternatively when leaving the menu by
pressing the bottom left ESC button.
To copy your settings to a different location, you also tap the lower space field of the data area and
then choose now highlighted in blue box with the INC / DEC buttons to select the target. Tapping
the CPY button copies the current parameters of the "upper" adjustment range in the selected
location.
WARNING
!
Make absolutely sure that the correct parameters are entered! Incorrect field valu-
es can not only seriously damage charger and / or battery packs but also result in
fire!
Press the ESC button on the bottom left to exit the menu.

Menu CHARGE

Add now the menu "PROFILE" key data concerning your batteries in this menu
CH ARG E 05:37:38
PM
"CHARGE" with the corresponding charging parameters. To do this, choose
00 NiCd Auto Mode
the battery type and cell number matching the battery to charge. So If neces-
Current Auto
sary, tap with your finger or the pen supplied in a lateral recess of the device
Peak Sens 7mV/C
to the "memory field". In the blue area now select via the INC / DEC buttons at
Trickle Auto
the bottom of the display the desired memory location 0 ... 19.
Tap again the field to deactivate the choice.
Cut-Temp. 50°C
Max.Capacity 120% Within the set for the selected location in the menu "PROFILE" now they
can be adjusted specifications regarding battery type and cell count, the
Safety Timer 120 m
charge current as well as other parameters as described below in this menu
"CHARGE".
CH1 CH2
18
Description
switch between the character tables
Tap this button to insert a space
Touching this key deletes the rearmost characters
Tap this button to delete the current battery name